APPSC AEE Results 2016, Assistant Executive Engineer Cut Off/Merit List

By | January 15, 2017

APPSC AEE Results 2016, Assistant Executive Engineer Cut Off/Merit List:

Briefly state with reference to the Public Service Commission, Andhra Pradesh notified Assistant Executive Engineers in Various Engineering Services (General Recruitment) Examination 2016 held on the 6th of November 2016 for Recruitment to 748 Posts of APPSC Assistant Executive Engineers (AEE) Mains Results 2016 in the subsequent Paragraphs.

APPSC AEE Screening Test Results 2016

appscblu

Criteria for Selection:

  1. Final Merit List of the Candidates shall be drawn up based on their individual Performance and Marks secured IN AGGREGATE both in Computer Based Online Test.
  2. The Minimum Marks to be secured by the Candidates in order to qualify in the Final Written Examination in the Paper is Open Category 40%; Backward Classes 35%; SCs/STs/Ex-Service Men 30% Marks.
  • Final Selection of the Candidates (Men & Women) will be made strictly on Merit.

APPSC AEE Mains Exam Admit Card 2016-16 Going to Held on 29th & 30th December 2016-> CHECK HERE

Assistant Executive Engineers Recruitment – Notification No.06/2016 : Display of correct Hall Ticket Numbers – Click Here


Results of Screening Test for AEE – 2016, Notification No: 06/2016


screen-shot-2016-11-28-at-9-17-47-am

 

APPSC AEE Screening Test 2016 Cut Off Marks

Check out Minimum Qualifying Marks for AEEs in Various Engineering Services (General Recruitment) Examination 2016:

The Public Service Commission, Andhra Pradesh determined the Community-wise Minimum Qualifying Marks for consideration of Candidate to the selection process @ Open Categories 40%, Backward Classes 35% Scheduled Castes, Scheduled Tribes and Physically Handicapped Candidates 30% or as per the Rules. The Minimum Qualifying Marks is relaxable in the case of SC/ST/BC/PH at the discretion of the Commission.

Check out the Results for Assistant Executive Engineers in Various Engineering Services (General Recruitment) Examination 2016:

Andhra Pradesh Public Service Commission shall declare the Result for the Written Part of the said Assistant Executive Engineers in Various Engineering Services (General Recruitment) Examination 2016 only after releasing the Final Model Answers Key, likely to be published before the 20th of November 2016.

We do look forward to Public Service Commission Andhra Pradesh to announce the Result for the Computer Based Recruitment Examination LATEST by the 13th of December 2016. Even as AP Public Service Commission shall declare on APPSC Website the Result as well as Final Communication in this regard, we would also concurrently display on our Website.

APPSC AEE Selection Procedure/ Detailed:

Andhra Pradesh Public Service Commission Notified Assistant Executive Engineers in Various Engineering Services (General Recruitment) Examination 2016 narrates the Selection of the Candidates for Appointment to the Posts shall be done based on the Merit in the Computer Based Recruitment Test conducted on the 6th November 2016 for Recruitment to the Posts displayed in the Table.

Name of the Posts No. of Vacancies
Assistant Executive Engineer (AEE) (Civil) in A.P. PH&ME Department  56
AEE (Civil / Mechanical) in A.P. Tribal Welfare Engineering Department  41
AEE (Civil) in A.P. Water Resources Department. 473
AEE (Mechanical) in A.P. Water Resources Department.   63
AEE (Civil / Mechanical) in A.P Panchayat Raj Engineering Service 113
AEE (Mechanical / Agricultural) in A.P. Ground Water Department   02
Total 748

Even as Final Selection to 748 Posts of Assistant Executive Engineers in various Engineering Services in various Engineering Section shall be strictly in order of Final Merit List and Final Select List concurring with Final Result Announcement District wise. However, it is mandatory for the Candidates to secure Community-wise Minimum Qualifying Marks (Open Category (OC) 40%; Backward Classes (BCs) 35%; Scheduled Castes / Scheduled Tribes / Ex-Service Men (30%) to be considered for Selection to the Posts notified (Males  in Females) all  Districts of Andhra Pradesh State.

The Candidates will be selected and allotted to Service / Department as per Ranks obtained in the Merit List and as per zonal Preference opted by the applicant at the time of submission of the Online Applications to the Post.

APPSC AEE Results 2016, Assistant Executive Engineer Cut Off/Merit List:

The Candidates will be selected and allotted to Service / Department as per Ranks obtained in the Merit List and as per zonal Preference opted by the applicant at the time of submission of the Online Applications to the Post.

Wishing here the Best of Luck!

Press Click here on PSCAP Website the Results.  

Share this Post:




1,301 thoughts on “APPSC AEE Results 2016, Assistant Executive Engineer Cut Off/Merit List

    1. kalyan ram Hp

      AEE MAINS 2016……sir there are 3 wrong answers in the key which APPSC board had released…….those 3 quoestions were
      1) in paper 2
      66Q……they gave answer as 3….but right aswer is 1….
      2) in paper 3
      19Q……quoestion itself wrong…because in quoestion they mentioned as shown in figure….but actually they didnt gave any figure in the quoestion paper…..
      96Q……they gave answer as 4(i.,e 10 years)….but right answer is 2(i.,e 30 years..bcoz in treatment units except rapid sand filters all the remaining are designed based on maximum hourly demand…..i.,e we get 30 years)……
      i am trying to inform to the APPSC board….but they are not picking up calls…..so can anyone please inform them….bcoz even single mark is vey valuable………thank you

      Reply
      1. srinivas

        dear friend it is 10 years refer CPHEEO standards water engineering

        Reply
        1. HEMANTH KAMAL

          Hi Mr. Srinivas Garu, Slow Sand Filters are designed for 30 Years (two times Avg Daily water demand) and Rapid sand filters are designed for 15 years. Please cross check. There is no design for 10 years anywhere.

          Reply
      2. HEMANTH KAMAL

        You are right boss, Raise the issue or objections by mailing to APPSC feedback. Feedback option will be there in right side bottom of website page.

        Reply
          1. ankit

            m getting around 300 marks but m non local. do i have any chance?

          2. Nani

            brother i scored 160 marx out of 450 and am frm sc community zone-1…is der any chance of selecting?? Lukin frwrd fr ur ansr

      3. manu

        The artificial seasoning method that causes timber to brittle and easy to break is kiln seasoning but in key anwser is boiling

        Reply
    2. Mukesh kumar

      Sir i mukesh kumar and my marks is 234 in aee main in open non local what is Chance for slection

      Reply
      1. kumar

        sir aee final selection lo reservations consider chestaraa…leka only merit based to select chestaraa

        Reply
  1. sreenivas

    No this is not the way to qualify. they told officially that they will select 1:50 for each post to the mains. it means they will select 37,400 for 748 posts to the mains. overall 71.88% appeared the exam. it means nearly 75% of appeared candidates will qualify to mains.

    Reply
    1. Raghu

      YES THEY CONSIDER RESERVATION. lekunte lets imagine sc lo 20 jobs unte 10 members e qualify ayyaru anukondi,remaining 10 jobs Back log lo untai.

      This means Zone vise ,each category lo enni vaccancy unte multiply by 50.

      Reply
      1. srinivas

        alagani evadiki padithe vadiki post ivvaru minimum knowledge kuda leni vadu aee ayi em peekuthadu

        Reply
  2. Panduranga

    AEE mechanical key lo mistakes unnai. What to do? I got 87 marks. Zone 2. Is there any chance

    Reply
    1. Panduranga

      q/r = c@/l

      Heat transfer composite wall
      question

      Coal production india 3rd place

      Reply
  3. aruna

    i don,t see my aee result . how to know the result? and how many marks for the qualification in the screen test

    Reply
  4. vijay Devarapalli

    No mistakes is Mechanical key..slenderness ratio question lo effective length tisukovali ante 2 times the given length for rectangular section and 4 times for circular section…Every answer is perfect…actually inertial force/viscous force = Reynolds number…inverse is Blake number…but Blake number is considered at low velocity..soo ichina options lo Reynolds number consider chesukovachu

    Reply
    1. Sreeram

      The Blake number in fluid mechanics is a nondimensional number showing the ratio of inertial force to viscous force. It is used in momentum transfer in general and in particular for flow of a fluid through beds of solids. It is a generalisation of the Reynolds number for flow through porous media…………by wikipedia

      Reply
    2. Sreeram

      The Blake number in fluid mechanics is a nondimensional number showing the ratio of inertial force to viscous force. It is used in momentum transfer in general and in particular for flow of a fluid through beds of solids. It is a generalisation of the Reynolds number for flow through porous media……..by wikipedia

      Reply
    3. Sai

      What about torque equation question. ‘I’ is printed instead of ‘T’. So answer option 3 only

      Reply
    4. ashok

      THERE ARE five mistakes in mech answer keys set d q no -34,129,141,116,127.

      Reply
  5. vijay Devarapalli

    Torsion equation lo I/J may be constant ga treat chesi undochu because I/J = I/2I = 0.5. Will be applicable for prismatic shaft only …soo if that was the case both 3 options are correct

    Reply
  6. vijay Devarapalli

    Blake number is a special case of Reynolds number and it is inverse of Re.no. Flow through solids lo kakunda boundary layer flows lo transition zone lo consider cheste ah number ardamiddi..wikipedia

    Reply
  7. ram

    sir 748 post lo 632 only civil valla ku apudu maximam civil vallu andaru qualify authara

    Reply
  8. D Bhanu Teja

    For Non-Local How much will be the cut off and how much percentage we have to score approximately and when we can expect these Results…

    Reply
  9. john

    as your script 1:50saying…. but as per appsc they gone select for 1:12 to 1:15 kadha

    Reply
  10. aruna

    sir in screen test i got a 33% in civil . and ‘sc’ category . so final test ki iam elegible or not

    Reply
    1. Abhilasha

      Sir ,I am getting 99 marks Civil engineering Dept. What is the chance that I could get into mains exam ? I belong to open category. Also, I have found 2 mistakes in answer key provided by APPSE ,where could I claim for them?

      Reply
  11. Tritva

    Stress concentration occour due to abrupt change in cross section so this option also correct…….. Laplace equation applicable for irrotational flow so correct option is a instead of c…

    Reply
    1. Xxxx

      Then why they make notch in izod and charpy……..it is notch….since ms do not fracture,,, it will undergo deformation and bend …toughness property…..ductile….so stress concentration factor like v notch and u notch provided….

      Reply
  12. krishna

    in corrigendum to the aeenotification, appsc have given that”Other conditions and details mentioned in the Notification No.06/2016,dt.17-08-2016 will remain unchanged.”
    it means that they will follow community wise minimum percentage for screening test results .

    Reply
  13. Anu

    I got 71 marks in appsc are civil,I belong to of.what are my chances to get qualified to mains

    Reply
  14. san

    Sir I got 71 marks in Screening test .my cast ST.is there any chance to mains. Zone 4

    Reply
  15. prathap

    Sir .civil engineering paper series A lo key mistakes unnai QUESTION numbers are 6.14.15.40.73.136

    Reply
  16. Jaga

    when can i expect the screening test result? pls let me know how many ppl attended the test.

    Reply
    1. sreenivas

      71.88% were attended that is around 51,000. 75% attended candidates will be selected for mains.

      Reply
  17. narasimha

    when was AEE screening test results coming out? and tell me cut off marks for sc category

    Reply
  18. Gangadhar

    if total no of applicants is 70000 and if they promote for main @ 1:50 then the cutoff marks will differ for civil and mechanical , as the no of posts are not equal.. Hopefully they will consider the reservation..
    All the best friends

    Reply
    1. Singampalli.

      I think, Thats Not the cutoff for mains, Its just qualified cutoff to consider your script as passed.

      Reply
      1. abitha

        I didn’t get what u mean to say. It means the cut off for mains is different from pass cut off? Please explain

        Reply
  19. Anusha

    I got 60 marks in this aee exam and i belong to oc caste I’m I aligible for main exam plz answer me

    Reply
    1. sreenivas

      No reservations for screening test. They will select 1:50 for each post means 748*50=37,400. Total 70,000 applicants and 71.88% were attended that is around 51000. 37,400/51,000=72.5% people will select for mains. 3/4 attended candidates will select for mains. According to my sources max candidates are getting 45-70 marks.

      Reply
      1. Bharath

        I got 63 marks in aee mechanical screening test and I am under BC B category.
        So could u please anyone tell me whether is there possible to qualify.

        Reply
  20. JP

    In AE notification it is clearly mentioned that 1:50 will be selected on GENERAL MERIT.Does it mean reservations not considered for prelims ?

    Reply
  21. Ramesh Gollangi

    I made a mistake by bubbling my roll number as 226 instead of 236, latter I corrected it by whitener, but I entered correct roll number in given roll number block. I’m getting 71 marks in mechanical. Does my answer sheet is valid or not? Friends please suggest me…

    Reply
    1. praveen

      aee cutoff oc-72marks
      bc-69marks
      sc-65marks
      st-63marks.
      i think best ofluck friends

      Reply
  22. PAPANA JAYA GOWRI

    Sir , i belong B C category i got 67 marks i have ladies reservation do i qualify to mains , pls let mo now, so i can prepare for mains ….

    Reply
    1. Hhhhhh

      Prime minister will remove all caste reservations…….****except women’s reservation****…99%…so u will be given job madam…work hard….

      Reply
  23. Prasanna kumar

    So many people’s got 75 below marks.. So I think many peoples qualify the main exams

    Reply
  24. Jaya prakash

    No reservations considered for prelims.
    Only on GENERAL MERIT.I just confirmed it from
    040-29802633.
    APPSC CUSTOMER CARE NUMBER.

    Reply
  25. E

    Cut off marks ….final key ,….when are they releasing,….tspsc aee release aindhi….mana ap psc…slow ra Bhai….

    Reply
  26. prasanth

    I got 78 marks in mechanical belong to obc caste, is there any chance for mains? and also the date of screening test result please? Thanks in advance.

    Reply
  27. Haari

    I got 61 marks in prelims of APPSC AEE. I am a female OC candidate of Mechanical Engineering. Can I expect my presence in mains exam?

    Reply
    1. Hh

      33 0/0 reservation….did u mark one bit answer also 33 percent it is shortcut to remember forest percentage….ur selected
      Don’t worry study hard for mains…job is urs…

      Reply
  28. Tritva

    I have got 86 marks in aee screening for mechanical engineering belong to other state…..ls there chance for mains?

    Reply
  29. JP

    1:50 ratio on general merit only.If any category missing that post will become backlog post.
    As per my opinion out of 10 students only 5-6 students got 70 above marks.if this assumption works cutoff will be in between 60-70.
    For civil 683×50=34150
    34150/50300=67%. Of people will qualify for mains.

    Reply
  30. mrudula

    jaya prakash garu u said that selection is based on general merit not on reservation……can i know how many marks should a OC student get to qualify…..i got 79 marks civil OC zone 4 is there any chance fr me to qualify for mains?????

    Reply
  31. kranthi

    konta mandi waste fellows ladies reservation meeda padi edustunnaru. vallu mundu caste reservation meeda matladi aa tarvata ladies reservation meeda comment cheyali.evariki urke job raadu. anni categories lonu heavy competition untundi. remember.

    Reply
  32. Jaya prakash

    Out of 748 vacancies 67 are for mech remaining 681 for civil.out of 50300 who wrote exam minimum 5000 will be mechanical students.out of 45000 civil engg applicants 34000 (681×50) will be qualified for mains.
    That means 75 % of applicants will be qualid.
    Those who get 70 above will be qualified irrespective of category.
    Guys this is just my opinion and calculation.
    No contravorsies plz.
    Me too eagerly waiting for result i got 76.

    Reply
    1. Gangadhar

      where it has been declared that they will take @ 1:50 ratio??

      I m just asking .. because I didn’t find anywhere..

      Reply
    2. Prem

      Can i get a bit clarification from u on the above:

      In notification it was writtien as some of the posts for Civil/Mech. Wt do u mean by that? Do u think Mech ppl dnt have any scope in those posts. Or is it merit based? If it is so then mech ppl will aso be in the race fr the same.

      If u hv any idea, please let me knw.

      Reply
  33. Haari

    Yes Kranthi, I agree with you. It is not easy for a girl to get a job in these particular departments. I got 85+% in B.Tech. But many industries of mechanical rejected me as I am a girl. They didn’t even give chance for interview. It is really shameful. Please don’t think that the girl’s life is full of opportunities.

    Reply
  34. VK

    Ikkada kuda girls godava modalapettaruga..mmiru ekkada calm Ga undanivvaru kada mi presence undi ani teliyataniki edo Oka godava create chesi bale timepass chestare..Btech 85%+ ahh .exam papers nuvve correction chesukunnava?? Ina mikenduku mechanical jobs intlo gas cylinder pettadam nerchukondi tarvata companies gurinchi alochinchandi

    Reply
  35. Xxxx

    Leka pote…reservations enti madam…subject gurunchi..ledu…okka ah vijay sir thappa inka evarina subject nerchukunnara…thappulu chuskunnara..ledu…150 ki guddi ga guddlu chutti..naaku antha percent vundhi….reservations vundha……mundu akkadawrong aina keys correct chese daniki try cheyandi madam…naaku vachindhi 95 mechanical …cheppukunnama…5 bitlu wrong ani chasthavundamu ikkada…okaraina dhani gurinchi kakunda…reservations gurinchi..matladutharu enti….

    Reply
  36. VK

    Civil vallaki around 632 vacancies plus or minus 5 Anthe bcoz roster point vacancies consider chestaru and 1:50 kaadu screening test consideration..This is unofficially offical info

    Reply
  37. vk

    Caste based reservations are applicable for screening test…General Merit means they will consider male and female as a single entity…Local candidate reservation is applicable too

    Reply
  38. vijay Devarapalli

    Regarding Blake number @Sreeram My source was not from Wikipedia its from my class notes.I was preparing for IES and that particular topic was taught by Amit Kakkar sir.And issues on Heat transfer problem may be the answer given was wrong in the key but how can we decide the angle between heat flow and c/s area?? It may be true in the examiner point of view ..And finally my dear friends don’t follow Wikipedia and books from authors like R.S.Khurmi and R.K.Jain those were written by idiots much of the content is wrong…i Hope u will follow some standard text books for the remaining exams..All d best

    Reply
  39. Haari

    Manners leni vaalle boys ani malliii prove chesaaru. Congrats for that. Bahusa marchipoyaremo sir meeru, reservations gurinchi matladindi memu kaadu meeru first. Aythe antha baagaa chadivevaallu reservations vethukkuntunaarem. Hello boss, just hold on. Idi mee illu kaadu indescent ga maatladadaniki. Nenu gas cylinder fix cheyadam chusukovaalaa. Aythe meerem chesthaaru sir? paper correction nene chesukunte mari 95 aaa meeeru! So paper meere set chesukunaaraa! Good carry on sir. Manners leni idiots ki thank a lot. I won’t see this website again.
    Good luck for all in mains

    Reply
  40. vijay Devarapalli

    @panduranga..the question was regarding proven coal reserves India’s place is 5th only and China is at no.3…..and according to u even for coal production also India is not at 3 its rank is 4

    Reply
  41. Vijay Devarapalli

    Stress concentration makes abrupt Change c/s area…It was not because of c/s area the Stress concentration takes place

    Reply
    1. ram varma

      hello brother, are u preparing for IES?? i need small help from.. i.e please tell me standard textbooks for newlt added syllabus in IES 2017 pattern and Do u have any notes of new syllabus??

      Reply
  42. sudhir

    friends……interview of appsc chairman………….officially he said no reservations in screening test …..1:50 ratio intake frm screening……….stop to your assumptions

    Reply
  43. cs

    Minimum qualifying marks suppose 37400 members will qalify in screening test in minimum qualify marks other wise 45000 members will qualify in prelims then he will go to cutoff

    Reply
  44. Tritva

    Ratio of cp and cv is gamma which depend on gas….so value of gamma is different for different gases….so ratio will not constant…..

    Reply
  45. Vijay Devarapalli

    What do u mean by different gases..basic assumption is that gamma=1.4 for real gas…This was the basic fundamental..If they clearly indicate about diatomic or triatomic gases then ur point is valid..and more over gases will have 2 values of specific heat and solids as well as liquids have only 1 value of specific heat which all are constant values only

    Reply
  46. Kranthi

    Yes I agree with Vijay….cp and CV constant for ideal. Gases …CL and CV increase and r decreases for real gases….even for real also most of the cases it is constant….r given by one plus two by x. X is dof ….x is 3for mono xis 5 x is 6 tri …….regarding stress concentration I already wrote @tritva…..it is notch only…I.e we use notch sensitivity factor…in machine design…..there are girls here like haari….85 percent b tech toppers ….she knows everything…

    Reply
  47. Phani

    Vijay devarapalli how much u got…I think u would have crossed 100….u seem more knowledgeable guy….cold heading is also high metal rate forming..given wromg…cores wrong…

    Reply
  48. vijay Devarapalli

    @ kranthi..Gas will have only 2 DOF and gamma for mono= 5/3 diatomic =7/5 and polyatomic gases = 4/3 and it the air which is having 1.41 gamma value..major constituents of air is oxygen and nitrogen which can be treated as diatomic(just for assumption while deriving equation not the original behaviour) then gamma value will be 1.4….Actually I don’t that formula 1+ 2/Dof. ..can u pls tell me how can we calculate from that….i calculated by deriving specific heat values and applying meyers equation which was a quite lengthy process..thats y I’m asking u..thnks in advance

    Reply
  49. Vijay Devarapalli

    @Phani cold heading is primarily done for metal wires whose c/s area should be changed means just like reshaping for that there is no need of high energy and those cold headed products are used as fastners..example in nut and bolt one of the components is a cold headed product..easy Ga chepalante they are like that of a hammer blow types Anthe so called as chipless manchining…and cores question lo kuda it is used to strengthen the mould only and that answer was according to the options only bcoz symmetrical casting Ki sweep patterns use cheste saripoiddi cores akarledu cavity ki core ki sambandame ledu and smooth surface kavalante dry sand manchi composition lo use cheste saripoiddi..so cores will do similar action like that of chaplets

    Reply
    1. Kranthi

      Vijay…don’t assume the types of pattern….now I will use split Pattern for symmetrical…definitions proper GA check…any textbook ….u take…core is to provide…recess…when u design cores…buoyant come in picture…there u need to minus 350xA ..unsupported load…if it greater than zero…then core need a support…I.e is provided by..chaplets which support..core…to withstand buoyancy forces….

      Reply
    2. Kranthi

      H=U+PV

      U=(x/2)RT
      X is dof…

      U try further u will end up with 1+2/x…from here ony u derive…r value…..depending on type of bonding triatomic gases have 6or 7 dof…but gen is 6..for co2 no2 etc…

      Reply
    3. prem

      @ Vijay …Dude…….. Chaplets used to support cores.

      Cores are used to provide recess in the casting. If core prints can not support the cores due to increase in metallostatic forces, we will use chaplets to provide support. And more over the chaplets will be made of the same material which is being casted, & will become the integral part of the casting.

      Hope that u can get some idea out of this.

      Reply
  50. Vijay Devarapalli

    Max efficiency of worm or worm wheel depends on friction angle and is independent of whether worm or worm wheel is the driver…max efficiency =1-sinx / 1+ sinx where x is the friction angle..the same formula js applicable for finding max efficiency of a screw jack..But according to key it was given differently..which one is correct ??? If anybody knows that answers pls tell us

    Reply
    1. Kranthi

      Open design date hand book…ubwill get answer…it us either of them can be taken…answer correct…good information ur collecting…did u collect after the exam or u know before…

      Reply
    2. Kranthi

      Open design date hand book…ubwill get answer…it us either of them can be taken…answer correct…good information ur collecting…did u collect after the exam or u know before…

      Reply
  51. Vijay Devarapalli

    @kranthi which text book…I got from Kalpak Jain….and y the picture buoyancy is coming here.. And chaplets are used to support cavity and core will be inside the cavity only..for complex shaped patterns we can use split piece patterns we have sweep patterns.i don’t know how can u use split piece to to make symmetrical products

    Reply
  52. Kranthi

    All are taken from previous ies bits…either u take made easy or ace…both are good …my text book NAGESWAR REDDY production…he is DRDO scientist..teach in ace academy…..

    Reply
  53. Vijay Devarapalli

    Ohh ur saying from previous IES questions ahh…see there it was given the main purpose of chaplets is — to support the cores ..it was the reliable answer if it ws given to support the cavity the what will u choose among cavity and core…and don’t tell me abt Ies Previous questions I have solved dozen of times

    Reply
  54. Kranthi

    Did u study core design…if u don’t know..it…density of core should be less than density of molten metal…properties of core…so weight of has to overcome the forces in casting…study further…u will land with answer…..most of these are taken from previous ies…answer options also same order…so read them for correct explanations…

    Reply
  55. Kranthi

    Then I think u would be topper man…ur telling all correct then…..all the best…solve another dozen times…

    Reply
  56. Vijay Devarapalli

    I’m gng to be an Ies officer waiting for my interview result….see y ru thinking beyond the point net bouyancy force= weight of liquid metal displaced – weight of core..if u know this u will end up with answer..if I take 3.5 times coreprint area it will be netupward force..density of molten metal ekkuva ne undiddi core density kante

    Reply
  57. vijay Devarapalli

    I can guess ur preparation level…half knowledge is more dangerous…Guys the answer given regarding the core question is correct…dnt mislead from others

    Reply
    1. Hhhhhh

      Neeku enni markulu vachina ra Bhai……rey kranthi GA neeku enni markulu vachina ra…ikkada kottukuntunaru…

      Reply
  58. Vijay Devarapalli

    Don’t predict whether u will be selected or not…those who r @60 or even beyond that will be qualified for mains..its for sure…i wont visit this site again to share my views..people who mugged up the answers won’t understand

    Reply
  59. Kranthi

    Then give us the source to study on the core definition from where u got …iam not mocking u
    ..we also want to become ies officer like u…so pls share information…which u got to prove half knowledge fellow…

    Reply
  60. Vk

    ies officer avalanukunte avvu Ra bhai kranthi.ikkada gola pedutunnav.ah vijay gadu Edo okati cheptunduga mi teacher ala epudina cheppadra? Arey niku basic ardam kanapudu enduku Ra bhai pareshan chestav

    Reply
    1. Kranthi

      Arey thappunni correct ani daani argue chesthadu endhira ra babu vaadu…okka chota chuppinchi cores are used to strengthen mold ani….nenu moosukunta…vaadu ah half knowledge gada…vere valla preparation meeda comment pettidhi…vaadiki

      Reply
  61. Xxxx

    Kranthi primary function is cavities only…not strengthen mould….it is secondatry purposes…referbelow link…vijay ur wrong man…I think ur half knowledged man…

    Arguing blindly…facts given kranti…are almost right….

    https://books.google.co.in/books?id=OAyDBgAAQBAJ&pg=PA97&lpg=PA97&dq=cores+are+used+to+strengthen+the+mould&source=bl&ots=GEbpxIj_PY&sig=LHmXpWr9dPOOQZssBrKlZ_C4Bz0&hl=en&sa=X&ved=0ahUKEwjbofqW7a7QAhWJpo8KHWLcBf8Q6AEIYDAH#v=onepage&q=cores%20are%20used%20to%20strengthen%20the%20mould&f=false

    Reply
  62. vk

    Arey bhai cores cavity Ki support Ga undiddi answer lo cavity ledu ani vadu mold ani chepindu.half knowledge vadu kad Ra bhai kranthi gad Ra.clear Ga cheppadga cores cavity lona untayi ani cavity lenapudu answer lo vadem chestad Ra howle

    Reply
  63. vk

    Sare Ra bhai.cavities cores pakkana padeyi a lolli manakenduku ah question Ki answer endhi mari

    Reply
  64. vk

    Arey Xxxx ga ah link chusinava asal nuv.vijay gad pettina coment chadavandra bhai answer was according to options anindu.arey em telinodini nake ardam autundi answer ento mirenti Ra bhai ace lo coaching annar ento ee andhrollu

    Reply
  65. vk

    Arey kranthi Ga ah link chusinava cores are used to strengthen mold ani kuda undi.em Ra musukuntava ipudu.cheppevalani chepanivandra bhai.vadu paper mottam explain chestadankunte aligi velipoindu vijay gadu

    Reply
  66. Kranthi

    Vijay sorry ra Bhai…nuvvu correct…option cavity in cavity ani vundhi….so as per options it mold strength is correct…..neeku ies vasthadhi le sai baba meedha nammakam pettuko…hurt ainte sorry…

    Reply
  67. sreenu

    sir pls clarify my doubt.nenu roll no wrong ga mark chesanu,malli corect chesanu,na paper consider chesthara pls tell me

    Reply
  68. Tritva

    Guys what will be pattern of aee mains exam?will it be of 45o marks as mentioned in old pattern?

    Reply
  69. Thune Rajasekhar

    WhenAEE screening test results released by appsc,,,,,Give me for information

    Reply
  70. harsha

    hello what is correct answer for bending moment at hinge
    according to me its change its sign. not ZERO….
    observe simply supported beam and overhanging beam

    Reply
  71. harsha

    i thing bending moment at hinge: changes its sign
    observation simply hinged and overhanging…

    Reply
  72. Tritva

    Hinge point may or may not be point of contraflexure….so unless it is not stated that the point is inflexation or not, generally bending moment will be zero about hing point……

    Reply
  73. vijay Devarapalli

    No point of contraflexure occurs at hinge support..because hinge makes the beam more flexible so that it can move.simply we can say an ideal free support…at free support bending moment is zero.applicable to both internal and external hinge

    Reply
  74. Srikanth

    @Vijay D If velocity potential satisfies Laplace equation,the flow will be?
    Asper “If velocity potential Φ satisfies laplace equation,it represents a possible steady,incompressible,irrotational flow”
    Ans is Irrotational flow na..
    but in key, gave continuous flow..
    which is the right one?

    Reply
    1. Varun

      Absolutely u ri8… the key was wrong not only that torsion formula and coal producer are aldo given wrong in key i already mailed to appsc but there is no reply from them…

      Reply
    2. Prashant

      Answer is right. If Laplace function of velocity function is satisfied then flow is possible or continuous flow occur

      Reply
  75. nikil

    if result will be dec13th what about mains date,will they postpone exam date?

    Reply
  76. vijay Devarapalli

    Yeah it should be irrotational only…whenever velocity potential or stream function satisfies it should be an irrotational flow only..provided it must be a continuous function…answer was given wrong it should be irrotational only

    Reply
  77. vijay Devarapalli

    For slenderness ratio question in getting the 346.2 but answer was given 692.4….which one is correct??

    Reply
    1. Kranthi

      Nenu kuda answer same petta bhayya….naku telisi vaadu free columns ante…2l thesukuni vuntadu…….irrotional flow correct …ela oh aidhu unnayi bhayya…model key isthadu anta final…objections column lo pettathadu ani chepparu ace academy…..1:50 ante…ippudu 50 mechanicqlnposts ante merit lo oh 1st 2500 mandi thestharu….so cutoff marks predict cheylem…suppose 10000 people ante 7500 intiki fisrt 2500 lopalik but indont know whether zonw wise isthada ledanani…i….vijay neku enni marks vachhayi….naku 95…oh 5 marks kosam wait chestavunna…

      Reply
  78. BHASKARA REDDY

    Cores are used for cavities and strengthening, but primary answer is to create cavities in mould.

    H= K A dt/dx, where for composite wall, H= A(T1-T3)/((dx1/k1 ) + dx2/k2)

    Reply
    1. Kranthi

      Heat transfer options wrong….inka ah core matter chala peddadi..paina arguements chudu…..once proper ga check chey va…vaadu option to provide cqvities in cavity ani vundhi…andhuke silient aiyya ledante vaadidi wrong ani prove chesy varaku nidra vachidi kadu…

      Reply
  79. vijay Devarapalli

    Ha aunu length fixity coefficient 2 tisukovalanta..so effective length 2L ayiddi..one new point free standing column means fixed and free ended column…then the answer will be 692.8

    Reply
  80. vijay Devarapalli

    My score is 107 ..im not aware of no negative marking system..otherwise if luck happens it may add 10 more marks

    Reply
  81. Vijay Devarapalli

    Local candidature status will be strictly followed even for screening test..if not it will become an All India open exam and it against law.If AP’s CM follows the Path of Telangana CM then there will be remote chances for candidates from other states…As reservations and roster points are not considerable it doesn’t mean that they will consider other state candidate…it is completely against law under employement regulaotory act..we all aware of AP CM’s way of following law.Remeber this is AP’s public service examination not UPSC

    Reply
  82. Vijay Devarapalli

    iam from Zone-2…Dnt worry even if I got the job I wont prefer..u can deduct me from the list

    Reply
  83. ram

    r u from Krishna district vijay? why don’t u prefer this job year… it’s also executive post na… my marks 88 in Screening test. I’m also mechanical student belonging to zone 2.

    Reply
  84. vijay Devarapalli

    im not saying that ur not going to face mains…Its my opinion u may have remote chances

    Reply
  85. arun

    Is there any weightage of prelims marks for the final selection OR the mains exam result will be evaluated separately for the interview round ?

    Reply
  86. thuglife

    here a bunch of over confidence people especially some one is repeatedly saying some unnecessary predictions ….keep calm and wait for results…….and there are few mistakes if you dint find any mistake in mechanical engineering questions you will never qualify IES ..its a dream to you… and AEE question paper is very easy,getting 110 marks is not a big thing for one who really prepares IES ………so keep calm bro ……………….guys prepare well for mains ,,they will select less than 25000 people for mains …..all the best to future AEE s…….

    Reply
  87. ram

    @arun there is no interview for AEE. and will not consider screening test marks. only they evaluated mains marks

    Reply
  88. vijay Devarapalli

    @thuglife: If u have any problem u can directly indicate my name..dont show off.u will be medically unfit for every job because of ur blindness.or else u may not understand English.i suggest u to read all my comments and then talk abt me….i pity u and my middle finger is giving standing ovation to u

    Reply
  89. Tritva

    Not bro…I m from delhi…..and no matter how many selected for mains….main competition is for aee mains…so LTS face it…..all the best dud………

    Reply
  90. Tritva

    Hey LTS chill gysss….prepare for mains bczz those who have got above 80 will be selected for mains…….

    Reply
    1. abitha

      Hey.. You post comments but without any proper justification. Please let us know how do you come to these type of conclusions

      Reply
  91. vijay Devarapalli

    @thuglife…will u cut ur penis if they select more than 25000 for mains and give remote preference to non-locals???? Provided if ur a boy

    Reply
  92. vijay Devarapalli

    Pillana kodukulandaru ikkade unatunaru.okadiki cheppindi ardam kadu inkodiki chadivindi kuda ardam kaadu…junior Horlicks tagandi raa babu edugutaru pichi na kodakallara

    Reply
  93. Ram raj

    Results release cheyandi sirrrrrrrr enkaa enni rojuloo waiting cheyaliii sirr

    Reply
  94. MURALI

    Next month first WK appsc will going to announce …
    Pls were today news paper eenadu

    Reply
  95. naresh

    there is a wrong prented quetion in telugu inGS QNO IS 45 IN D seres. for this mark is given or not,,, and combined capital is 10 years given in vijetha copitetion book, but in in key it is given as not exeeding 10 years. …, and there is a key mistakes in civil eng paper QNO 92.

    Reply
  96. Tritva

    True ans is not exceeding 10 year……follow padmavti publication instead of vijeta bcz there are lot of mistake in this book……

    Reply
  97. siva

    Not exceeding 10 year is a correct answer ap reorganisation act lo gazited lo undhi

    Reply
  98. Vijay Devarapalli

    Watch Andhra Jyothi Diksuchi paper..Appsc chairman’s interview…he clarified that 85% for local and 15% for non-local..althought it is related to group-2 exam but read it completely he said it will be applicable to all notifications of appsc

    Reply
  99. venkat

    i got 100 marks for aee mechanical bc-b caste what was my chanses for mains?

    Reply
  100. venkat

    i got 100 marks from aee mechanical bc-b caste what was my chanses for mains>

    Reply
      1. venkat

        this is venkat from mechanical bc-b caste and from the zone-4
        i got 100 in aee prelims what was the chance for me to mains sir?

        Reply
  101. shiv om shukla

    sir I GOT 59 marks…civil engg..non local ..is there is any chance?

    Reply
  102. Siddu

    Bad news to all ..appsc cancels aee exam ….they are going to reconduct it again ………if this happens how many will disappointed ?????…….just for fun …when they will release final key

    Reply
  103. Kiran

    I got 59 Mark’s from civil can I expect to any chance to main Exm in BC reservation

    Reply
  104. JAVED AKHTAR

    Is there any other criteria for other state candidate in p.t..what is the cutt off for other state candidate of BC category…plz reply

    Reply
  105. Sridhar

    Hi guys anybody have C set mechanical paper pleas let me know actually i forget my paper in examcentre

    Reply
  106. Vijay Devarapalli

    Appsc Aee Screening test results will be declared on or before Dec2nd 2016…they r going to select 37500 members for mains.
    Source : Andhra Jyothi news paper .page 8

    Reply
  107. Sai

    Sir..it’s not page no.8…it is page no.12 in Andhra Jyothi today’s newspaper

    Reply
  108. Vijay Devarapalli

    Orini paper chadavatam kuda rada..Its page 8th only..12th page is sports page.

    Reply
  109. Darling

    Guys..as we all know there is no reservation for screening test..so what is the expected cutoff in your point of you guys……..?

    I think it will be about 70

    Reply
  110. Tritva

    Ya as there is single cutoff for every students so cutoff will be between 70 to 80

    Reply
  111. raju

    Again 37500 candidates will be reappearing for exam means no use of prelims. Its a waste of time. According to appsc rules if the number of candidates are more than 25000 they should conduct prelims. I dont understand what they are doing and what they are thinking. He mentioned clearly out 0f 50000 candidates again 37500 will reappear just for reducing 12500 candidates he kept prelims.

    Other thing he didnt calirify will he select based on merit or reservation system?? only god knows whats going !!

    Reply
  112. Bharath

    I got 63 marks in AEE Screening test 2016 in Mechanical Engineering.
    And I come under BC B Category.
    So could u please anyone tell me whether can I qualify in this Prelims.

    Reply
  113. nikil

    Reg—-Results
    https://www.psc.ap.gov.in/UI/UserManuals/AEE-Notifications/AEE%20Exam%20Results_and%20selection%20ratio.PDF

    Notification 06/2016: AEE Exam Results and selection ratio
    Several queries are received regarding date of declaration of result of AEE
    Screening Test and also the selection ratio. It is informed that efforts are being
    made to release the results in first week of December, 2016 and the dates of main
    examination stands good and there is no change. The selection ratio from
    screening test to main examination would be 1:50 with reference to the number
    of posts. It may also be noted that care is being taken while evaluating the cases
    of multiple hall tickets and the correct hall ticket numbers would be published on
    the website soon. It may also be stated that at this stage centre change is not
    permitted. Instances of candidates who have not passed the degree but appeared
    in the Screening test have also come to our notice. It may be informed to such
    candidates as well as other candidates who may not eligible due to criteria like
    over age, under age etc that they were allowed to sit in the examination based
    upon their self declaration. We are going to verify the data before main
    examination and if there is any mis-declaration or false declaration appropriate
    action would be taken under Regulation PME which is published in GOMS No: 385
    of GA(Ser A) Department dated 18/10/2016.
    Sd/-
    Secretary, APPSC

    Reply
  114. Gangadhar

    As they declared to take in 1:50 ratio for main..he cutoff mark will may differ for Civil and mechanical .. according to the No of posts and No of candidates appeared screening test..

    And we cant be sure about the cut off marks as we don’t know the exact graph how many candidates got how much marks.. like how many got above 100, how many got above 50.. etc..

    wait for your hall ticket No to see in the merit list.

    Reply
  115. Bhargava Tejesh

    Estimated cutoff in mechanical for general in AEE mains out of 450.

    Post ur opinions

    Reply
  116. P.Hariha

    In mechanical engineering quasition paper mistakes are their u have to give that marks or not.

    Reply
  117. sreenivas

    Rey burra thakkuva vedavallara… Appsc chairman Ade paniga cheptunnadu screening test lo reservations undavu ani. Aina malli malli adugutharentra. Notification a artham cheskolekapote engineers ayi ame chestharu.

    Reply
    1. siva

      neku telisthe musukuni kurcho give respect and take respect policy marchipoku oka na
      evari self respect vallaki utandi daniki value ivvadam nerchuko NEKU TELUSTHE CHEPPU ARDHAMAYYATATU lekapothe better do ur work

      Reply
      1. sreenivas

        Self respect aa ??? Ne comment chustene telusthondi nu antha respect istavo. Okariki maryada nerpetapudu mundu manam maryadaga undali. Reservations levu ani antha mandi post chesina malli malli adigite avadikina kaluthundi. Nenu anna dantlo thappemundi ? Notification sarigga telusukolenivallu engineers ayi ame chestharu ??? Aina kopam na meeda kadule deni meedo andariki arthamayye untundi.

        Reply
        1. Smac Babe

          My dear!! If at all you have some concrete evidence that someone spoke on something to the point….then instead of getting frustrated with their questions, please post the exact clip of the same and shut their question if you really don’t want to see the same question again…… and mind you, not your own apprehended declarations ….. You don’t own any patent rights on someone else blog of what questions are to be raised and not, in it…. So pity that you don’t even have the minimum common sense of properly addressing the emotions of a human being who is very next to you….. so leave apart of you being a good engineer, you are not even in the domain of a civilized culture and you don’t deserve to be included in the homosapien specie …. Your answers only show up how insecure you are ……. I can only wish you the best in life

          Reply
        2. Siva

          Edava, burra takuva, ituvantivi kavu respect ivadam ante and inkoti neku kalithe that’s ur problem.
          And andari ki anni teleyav NEKU KUDA so telisthe cheppu chiraku vaste vadilye better kopam naku ne meda kadu , caste meda kadu , nv Anna mata correct kadu ani cheppalani straight ga cheppa
          And naku reservation ledu I’m also open category k

          Reply
  118. Smac Babe

    Am sorry pals!!! prathi burralaeni vadu salahalu isthey ilaagey untundi…. Chariman cheppinadaniki evadikivaadu vaadiki istam ayena reethi lo ardham chesukoni aa py vaari istam vachhina danini Chairman matagaa marchesthey…. avi aadavari maatalaku ardhaley verulaey la untundi…….. Please have some sense while posting something on the wall hosted by somebody else and which is accessible to public…. Rest … in your private page … do whatever you want but don’t trouble your mother man!!!

    Reply
  119. RK

    Be a professional guys. U r all studied engineering be have like that other wise it is absolutely ethical question mark to your gurus what they taught.

    Reply
    1. VENKATESH NEMALA

      If 100 + , then confirmed your chances for mains, in my view, but i dont have sources.

      Reply
  120. Smac Babe

    My dear ones who all are offended to see some repeated questions!! If at all you have some concrete evidence that someone spoke on something to the point….then instead of getting frustrated with their questions, please post the exact clip of the same and shut their question if you really don’t want to see the same question again…… and mind you, not your own apprehended declarations ….. You don’t own any patent rights on someone else blog of what questions are to be raised and not, in it…. So pity that you don’t even have the minimum common sense of properly addressing the emotions of a human being who is very next to you….. so leave apart of you being a good engineer, you are not even in the domain of a civilized culture and you don’t deserve to be included in the homosapien specie …. Your answers only show up how insecure you are ……. I can only wish one the best in his/her life

    Reply
  121. everyone

    Guys I heard tomorrow( dec2nd) Aee results are going to be released…is it real????

    Reply
  122. Anu

    Hii.. I got 56 marks civil engineering zone 2 local. Any chance for mains
    .

    Reply
  123. MURALI

    There is a9 mistakes in aee paper
    2 ques frm general
    2 ques from paper3
    5 ques from paper 2
    They are removed these marks and finally they calculate to 141 marks in civil/mech
    Selection should be 1:50

    Reply
  124. Manasa

    they haven’t fixed any cutoff mark.how people predict cutoff like that.70-75-80 like thayt.stop making your own predictions .people who got low marks don’t get disappointed we all got marks like you only.
    @Tritva will u pls shut all your bloody predixctions.Go n write ur state psc stop showing off here

    Reply
  125. Manasa

    Tritva stop your bloody useless predictions
    Does Appsc chairman personally told u about cutoff.Shut your mouth and concentrate on your state Psc’s .Dont showoff here

    Reply
  126. Modi

    Result will be declared today..evaluation of mech and civil paper is for 141 marks only..

    Reply
  127. nayak

    AEE screening test results eeroju(Friday) release chesthunnaru . ithe question paper lo konni tappulu unddatam
    vatini tisesaru civil and mechanical 141 questions matrame valute chesthunnaru
    aggreculture 148 questions valute chesthunnaru
    ithe 748 postulu unnayi okko postku 50 members Ni mains ki qualify chestharantta
    APPSC chairman udhay bhaskar chepparu

    algae Eenadu news papers lo main addition lo 11th page chudandi

    Reply
  128. Sandeep

    I got 53 marks in mechanical Aee I am in sc category any chances are there

    Reply
  129. Tritva

    No reservation….single cutoff for every candidate……so wait for result………..

    Reply
  130. riya

    It seems lyk dat here many ppl r dont knw how to bhve..tritva u r frm oder state datz y many r jealous here..dnt wry.it z shwng der persnlty nt urz…bdw best f luck to all…

    Reply
  131. Rani

    I got 55 marks in civil engineering local zone – 2 can I qualify prelims

    Reply
  132. Deepa

    I got 55 marks in civil engineering local zone 2 can I qualify prelims

    Reply
    1. AKASH

      Don’t worry guys .. All IS WELL !
      ALL THE VERY BEST TO YOU ALL
      wait ! AND COUNT DOWN STARTS !!!!!!
      7
      (6)
      5
      4
      3
      2
      1

      Reply
  133. kvs

    When did you aee Results are released…..plz tell me friends? And which time are released ? ?

    Reply
  134. Tritva

    No local reservation only general merit consider for screening…..so stop this BC cast sc cast local etc……be rdy for mains gyssss……

    Reply
  135. srinu

    Guys I just watched in ABN news channel.appsc is going to release results today only.they r waiting for one of d minister to release results..Journalist raised d point about local reservation status they said that they are following 85:15 local vs non-local status irrespective of caste reservation and roster points.Hold ur breath and count as d result time is approaching

    Reply
  136. ram

    @tritva in mains definitely they will consider all types of reservations including local n non local also. gud luck

    Reply
  137. Smac Babe

    Dear competitors!!! Let’s make it clean and simple as regards the cutoff criteria……… till this moment the only source of filtration is 1:50 ratio …. that’s it…… nobody from PSC, till this moment has uttered a single word on the cutoff marks in screening test of AEE 2016… Nothing has been declared specifically as regards the cutoff for any category and not even that it will be based on category wise merit and for that matter not even that it is only general merit(clubbing all categories) as far as screening test is concerned….. So it is high time we keep ourselves calm and better not make the blog dirty with demeaning comments as done by some too intelligent engineers here…… Had they shown their intelligence before passing out from the campus, am sure they wouldn’t have this surplus time to waste on frustrated illogical speculations ….. Earnest request to one and all irrespective of the category one belongs to….. ” Be optimistic and only just wait to see your hall ticket number declared as qualified or not”

    Reply
  138. manasa

    Flash..in screening test local n non-local preference is given..results r delayed due to one of d ministers as he has to come n release

    Source ABN news channel 8.pm news

    Reply
  139. Fuck everyone

    No reservations for preliminary,cutoff will be around 35%.the results will be tomorrow morning or today midnight.

    Reply
  140. ram

    @manasa which zone and which branch u belongs to?? and what’s ur score in Screening test.

    Reply
  141. madhuri

    Andhra Pradesh SI posts written exam results released..hope Aee also r on d way

    Reply
  142. mahesh

    Again tritva came by fake name Fuck everyone…haha u will not change still a kid

    Reply
  143. SAI

    APPSC FAILED TO KEEP THEIR PROMISE STATING THAT THEY WILL RELEASE AEE RESULTS ON FRIDAY.

    Reply
  144. manasa

    Appsc aee results r out..cutoff is 49marks..link was activates around 4.a.m. Now it was removed..iam in mains I saw my result with my eyes

    Reply
  145. Taraka raghu

    Officially cut off is 49..37400 aspirants are qualified…all the best to all…source Eenadu news paper

    Reply
  146. ram

    @manasa nuv select ayyv lemma… ok ok enni marks vachai cheppu 49 ahhh…. nuv civil ah lekunte mechanical ah.

    Reply
  147. raja

    they said there is no -ve marking.,then why the marks are in decimals??
    any changes regarding -ve marking

    Reply
    1. prem

      See 9 que have been removed so u r score ll be evaluated fr 141. and they ll match up the same to 150 marks. so in this process u ll get the score in decimal points.

      Reply
  148. Tritva

    Is mechanical cutoff also 49?…somebody tell me…the site is not opening……

    Reply
  149. Xxx

    Booklet lo code mention cheiyaledu disqualified ani ochindhi is there any source to rectify

    Reply
  150. Tritva

    Yeaahh…me to qualify for mains…..best of luck for mains to all of u gysssss……

    Reply
  151. nikil

    no mechanical, no civil, noagriculture. they shortlisted on the basis of total postsmultiplied by 50 so 37500 were selected, in that all three branch pepple are there.

    Reply
  152. Ramya

    Guys,,,i wz vry much confused dat wht i wnt to study nd which material will be gng to use fr mains so plz cnfrm any refrnce books or magazines dat must be vry hlpful fr us,,,,like i mean it must be sure dat da qustns will more chances to come,,,or any advises had given by the chairman or any other officials to prepare lyk telugu acedemy so nd so if u hve any idea regarding ds plz post ur cmnt guys

    Reply
  153. Tritva

    @ramya….read vijeta publication book for paper one…..and for remaining two papers follow your notes and HB keshwani objective mechnicl…….it is more than enough…….

    Reply
  154. kumar

    sir AEE mains taruvata selection procedure lo sc,st, obc laku reservations untayaa leka reservation em undadaaa..

    Reply
  155. ram

    @ kumara don’t worry. they will consider all reservations including local and non local, women reservation, sc, st, obc…

    Reply
  156. kamesh

    @ For selection procedure all reservations considered and also local non local 85:15..for mechanical 310 above OC and 290 above SC / ST may get Job according 2012 are results

    Reply
  157. Vijay Devarapalli

    Don’t follow vijetha publications as there are many mistakes in theory as well as practice questions…And don’t follow answers in HB Keshwani book some answers are marked wrong

    Reply
  158. alam

    hi vijay how much i have to score in mains to go for intrw civil non local help pls

    Reply
  159. Tritva

    No interview….only on merit base…score above 300 may cnfrm Ur chance for job ..

    Reply
  160. Aakash

    I got 96 marks in civil engg. Paper and i am from other state.how much marks I needed in mains paper to secure seat.

    Reply
  161. Aakash

    In advertisement it’s show 50 marks interview from outsider and what would be expected or minimum marks required for other state candidate to secure seat.

    Reply
  162. VENKATESH

    @Aakash : Please show me the screenshot given in the notification regarding your doubt.

    Reply
  163. ABHISHEK

    PLEASE LET ME KNOW WETHER THE APPSC AEE PRE WAS JUST QUALIFYING OR ITS MARKS WILL BE CONSIDERED ALONG WITH MAINS IN FINAL MERIT??

    Reply
  164. ABHISHEK

    PLZ let me know wether appsc aee pre was just to screenout or its marks will be added with mains for final merit list prepration??

    Reply
  165. ram

    @abhishek.. screening test was only qualifying test. they will not consider screening test marks. this recruitment purely based on mains exam marks only.

    Reply
  166. dhanu

    hi friends 529 post are only civil, and 63 only mechanical, and 2 only AG ,,, 153 CIVIL AND MECHANICAL 37400 MEMBERS QUALIFY CIVIL MECHANICAL AND AG SO CIVIL MEMBERS VERY may be 1:30 best of luck

    Reply
  167. Tritva

    No interview… It is clearly mentioned in notification that merit will strictly based on CBT….

    Reply
    1. Ravi

      Before 2010 people got job if he scored less than 200 marks in all papers but in between 2010 – 2012 many selected people got 240 to 270 marks. Now it’s 2016 maybe it will increase i think so… latest results shows that many people got 90 to 100+ in my point of view I tnk 330 to 350+ is the best score for anyone for 100% job. Sorry If i hut anyone 🙏

      Reply
  168. Tritva

    @vijay devarpalli…..upsc final result has been released….hws Ur result?selected for ies or not?

    Reply
  169. VENKATESH

    @ Renu, General Studies is very important when two or more candidates marks matched, so GS marks should be 110+ or 120 around.

    Reply
  170. VENKATESH

    @ sandeep, 1 week prior to the examination date or 9 to 10 days prior to the date of examination.

    Reply
  171. Tritva

    In syllabus there is modern history but in previous paper medieval and ancient history also asked….we have to read only modern history or all of three?someone tell me its too confusing…..

    Reply
  172. VENKATESH

    @ Tritva, In general almost all of the aspirants definitely go through complete history irrespective of the period, my suggestion is to prepare for ancient, medieval and modern history, but preference to modern history. In APPSC AEE coaching lectures gave information regarding complete history.

    Reply
  173. VENKATESH

    Important things to prepare from ancient history are buddhism & jainism related & vedic period.

    Reply
  174. Teja

    I have selected wrong zone for applying for AEE exam.
    Is there any chance to change the zone now?
    please help me

    Reply
  175. VENKATESH

    @Teja, infact 15th october is the last date for any corrections in the AEE application and OTPR options, so right now there is no other way to correct it, but try to send your query to the appschelpdesk@gmail.com for solutions.

    Reply
  176. Ravi

    After Aee mains Answer key will be provided in how many days? If anyone knows please reply…

    Reply
  177. Ravi

    Gud news genco notification is cmng soon 😁 See today’s Eenadu news paper

    Reply
    1. Ravi

      Both are going to be released ( genco lo starting salary ney chala vuntundi ani vina)😁😁

      Reply
  178. Haripriya

    Guys jst chill in prelims
    Above 100- 100
    Above 90- 1500
    Above 80-8000
    Are there so on a rough estumate the cutoff may be b/w 250-300
    Apart f

    Reply
  179. Haripriya

    Guys jst chill in prelims
    Above 100- 100
    Above 90- 1500
    Above 80-8000
    Are there so on a rough estumate the cutoff may be b/w 250-300
    Apart from prelims mains xam is for a total of 450 and will have questions deeper than that of the prior so hope for da best and total number of 37400 comprises of mech civil and agri so we cannot say based on the prelims marks so pls kindly dont draw any conclusions and increase the pressure if ur capable of it go for it but plz dnt post ur view and prospectives
    If it hurts anyone sry but do keep in mind ur opinion should not effect others cinfidence

    Reply
    1. Ravi

      In 2013 Ae many selected people got Gk100+ & 2011 Aee many selected people got paper2 & 3 = 85+ Marks in each paper

      Reply
    2. vinay

      Hi…there are 612 people who got more than 100+ score (mech + Civil) together…please check

      Reply
    3. HEMANTH KAMAL

      Expected Cutoff for AEE Mains 2016

      OC-270-280
      OBC-240-250
      SC/ST-200- 220

      Note: General Studies minimum Qualifying mark is compulsory. OC-60, OBC-53, SC/ST-45.

      Reply
  180. Ravi

    Note:” Not for Topers” Others Just follow this rule try to get in Paper 1 = 120+ nd paper 2 = 75 & paper 3 = 75. Total 270. This is followed in previous years (100 percent) It will work. Just give best in u. If u got job just tell me “Tnk u Ravi”😁

    Reply
  181. Haripriya

    My uncke wrote xam in 2013 and got job he has scored only 220 and got job with no job yar it depends on da paper and ur prescence of mind nd all da very best for all for both AE &AEE xams

    Reply
    1. Ravi

      In 2013 their is no appsc Aee notification how ur uncle got job?? Once ask him again I tnk it’s Ae it’s for 300 marks ur uncle got 220

      Reply
  182. ram

    @hari priya, u r from which branch and which zone. how many marks u scored in aee screening test?

    Reply
  183. praveena

    Guys….Wht abt these problematic qustns……how many questions we may expect in each paper I mean in Core subjects paper 2 n 3

    Reply
  184. praveena

    Guys……why abt these problematic qustns………we may expect how many questions will appear in Core subject I mean in paper2 n 3

    Reply
  185. Praveena

    Guys…….what abt these problematic qustns……how much of weightage we may except only on problems out of 150 I mean only in Core subjects paper2 n 3 mechanical

    Reply
  186. Ravi

    Just completed only 5 percent portion nd 12 golden days r remaining. This is my last message in this group. If I got 300+ marks I will b back. I’m from zone 2 civil Engineer. Al d bst All Aee Friends ur Ravi 😁

    Reply
  187. ram

    @haripriya, I’m from zone 2 and my branch mechanical and I got 88 marks in Screening test

    Reply
  188. Siva

    I was shocked by seeing 2012 Aee question paper it was copy and paste by Unkown Text Book. In core subjects he gave all 150 questions just copy and paste

    Reply
  189. Siva

    I was shocked by seeing 2012 Aee question paper it was copy and paste by Unkown Text Book. In core subjects he gave all 150 questions just copy and paste

    Reply
  190. Siva

    Expected cutoff for Ae 149 jobs 1:50 or 1:15 if it is 1:50 marks 80+ or 1:15 100+ Cutoff please reply

    Reply
  191. Siva

    Wow paper is dead easy super paper except some gk questions Cutoff will be more than expected

    Reply
    1. Siva

      Nice score but I got Just 34 marks can u please guide me how to increase few marks please guide me tell me how your getting more marks..

      Reply
  192. Haripriya

    Nenu gk prepare avvanu@shiva and total i got 115 gk ki newspaper chaduv ta ante and demonestation percent 86.4 84 kadu
    And raja ki anu ki middile lo evaru undaru sdp goals 11 17 kadu
    Andhra jatheeya kalasa non co-operation movement vandemataram kadu
    Thiamine rice grain husk anukunta

    Reply
    1. Siva

      Questions paper already prepared thats y why to take pain for this…they are going for copy paste I observed last 5yrs papers.. good but don’t simply depend on it r else u will feel after mains. I asked abt this Aee selected officer he told me this

      Reply
  193. Vijay Devarapalli

    @Tritva ..yup man…i got selected…Iam an IES officer now…i was busy in documentation procedure.so it was bit late to reply u

    Reply
    1. Siva

      You don’t know? Really once read notification in detail that ram also don’t know are hiding information. Once read complete notification. What i told is true if u have any Aee relatives ask them

      Reply
    2. Ravi

      Yes ur right min marks leka potey nenu paper 2 lo 140 nd 3rd paper lo 90 nd gk lo 40 techukuntey job estara chepu evaru. manam collage lo ani subjects pass itey ney ga manaki degree certificate estaru. Haripriya r u having any reservation if u have it will decrease ur qualifying marks

      Reply
      1. Ravi

        If u got 140 140 in 2 papers nd 3rd paper 40 u will be out. So first qualifying in all papers is important. And after overall marks should be in merit list

        Reply
  194. ram

    @haripriya in previous AEE exam there were no separate qualifying marks in each paper. they were considered only total merit. this information is 100% correct. and u will get AEE post score around 270 y because u r under female category. all the best sister.

    Reply
    1. Ravi

      Ram ur wrong once please read notification. Don’t play with their future🙏

      Reply
      1. VENKATESH

        Plz give me the page number in the notification, where this point is shown.

        Reply
  195. Gangadhar

    Friends,
    What about hall tickets for mains??

    any idea?
    It is not uploaded yet in website.

    Reply
  196. Balu

    frnds min qualifying marks for each paper 40% for OC 35%OBC 30% ST,SC.present unna compitation ki boys ki above 300 ravali for unreserved mem girls ki above 280 ravali. conform ga job vastadi,The old appsc commission members are different(copy and paste ques ) present appsc commision members are different(conceptual ques ) here Uday Bhaskar sir (appsc chairman) undi….. so, appsc lo job kottali ante it is not a easy task.All the best frnds

    Reply
      1. Ravi

        I’m v8tng for the best hardest ever appsc paper I hope it will be cmng this time 😁

        Reply
  197. VENKATESH

    Guys & Girls, please give me the page number in AEE notification, where this point shown (qualifying marks consideration for paper-1, paper-2, paper-3 individually), this type of format previously i had seen in JTO civil exam, that every candidate have to qualify in general studies paper, for the consideration of the technical/civil/second paper. If explained he/she can be appreciable.

    Reply
  198. Ravi

    In Appsc mainly Gk is used for filtering more candidates. Suppose a Toper/Best/Good in fundamentals students score more marks in core Subjects because subject is limited how much difficult is paper( entha kastam GA echina ekado vuntaru Topper) Now Gk comes to play it’s a huge endless subject here they can stop Topper( No limit nv entha chadivina inka chala vuntundi there is no end) so many people will disqualify

    Reply
    1. Ravi

      👍 nv chepu Bro paper easy vundi andaru pass avataniki manam semister exam rayatledu we are writing job exam tough ga vundi mamam qualify itey Ela vuntundi super kada

      Reply
  199. ram

    In AEE notification, in para12, they clearly mention minimum qualifying marks for oc’s bc’s etc.. but don’t in each section of paper. ok I’m not misleading any one.

    Reply
  200. ram

    And the big issue… according to my opinion, that a topper can cross easily 60 marks in Gk also. so all the best for all. hope hall tickets will be available in website tomorro.

    Reply
  201. VENKATESH

    Link available to download mains aee halticket, plz check it guys n girls.

    Reply
  202. nani

    from mechanical branch: 13963, Agricultural: 51, and remaining 23386 from civil selected for mains AEEexam.

    Reply
  203. ram

    Frds My Target 🎯 90+ above in all subjects Frds tell me all the best 😁

    Reply
  204. Ravi

    Hi My Target 🎯 90+ above in all subjects Frds tell me all the best 😁 😁

    Reply
  205. Haripriya

    Hii My Target 🎯 90+ above in all subjects Frds tell me all the best 😁 😁

    Reply
  206. nani

    Buddy My Target 🎯 90+ above in all subjects Frds tell me all the best 😁

    Reply
  207. sandeep

    Dude My Target 🎯 90+ above in all subjects Frds tell me all the best 😁

    Reply
  208. Haripriya

    Friends My Target 🎯 90+ above in all subjects Frds tell me all the best 😁 🎉👌

    Reply
  209. Ravi

    🚗 is allowed to parking in exam centre are not reply me my journey is longer from to exam centre

    Reply
  210. Haripriya

    I have a doubt selection is based on the merit list or based on the zone we belong to

    Reply
    1. Siva

      Zone merit list okay.. what is your home town (example:Vijayawada) how much distance you have to travel to exam

      Reply
  211. Bhargav

    I got vignans lara institute as the exam centre. Inkevaikaina ochinda ikada ?

    Reply
  212. Vijay Devarapalli

    Don’t panic regarding Gk..better study which has boundary portion like current events,aptitude and reasoning,2011 census,important dates in disaster management,demonitization.surely they will ask about Donald Trump and Us elections,India’s rank in different categories,Oscar awards…Just leave history we cant remember everything.anyway we can answer 6-10 history and geography bits by our common sense..recently happened days like population day like that..

    Reply
  213. Vijay Devarapalli

    Regarding selection also overall cutoff will play..i.e.out of 450 marks only..no sectional cutoff…overall merit will be consider and selection will be made on ur zone preference subjected to rules and roster points…This is not semester examination so paper will be easy or moderate only.. and there will be no chance of being tough

    Reply
  214. Sravan

    Are u writing 1st time Appsc. We are group of people living in Hyderabad hostel nd preparing for this exam. There is paper cutoff 1st nd merit cutoff afterwards. We are seeing one gay comment @Ravi : small doubt are you Rws Ae 2013 zone2 one of the selected list topper isn’t he. I’m your hostel mate

    Reply
  215. Vijay Devarapalli

    Yeah all we r children only..we r writing appsc for d first time as we r not preparing In hyd hostels with group of people.we r not senior citizens like u who r preparing from decades..and we r not preparing for any bank exams to be in dielama of considering sectional cutoff or not…Finally we r children only and we know when is children’s day.amy be u dnt know that’s y ur wishing today..Go and ask ur kids..may be at least u will know when it was

    Reply
  216. Venky

    Hahaha.avunu manam andam children.ina age limit undi kada snr citizens Ki telidemo.oye tatha notification sarigga chaduvu.

    Reply
  217. Sravan

    It’s difficult to speak with half knowledge people. Friends ask paper wise cut off information if you know any Aee Ae De Ce sc Jr in Appsc. OC students have to get 60 marks in each papers. Bc non creamy 52.5 marks in each paper and others 45marks in each paper. Friends if u know 100per abt this please speak or else after results u will feel. What I know I am saying that. Appsc will not give jobs if u score below this. If 37450 people don’t qualify like this then only cutoff will decreases. But this time this will not happen selected people will get more than this. All the best for your future

    Reply
  218. RANA

    In previous exams those how score more marks did not get job due to less jobs in their zone. One of my friend who got zone 5th top he also don’t got job. So be careful getting marks is as important as having more jobs is also that much important. 749 Aee will be the final outcome of 37450. Rest 36701 you have to Wait for another few years.

    Reply
  219. Siva

    Bad luck is what we left as not important comes in exam 😭 Gud luck is what we read in last day comes in exam 😉Frankly speaking in this exam their will be no luck factor only knowledge factor brings you job those who are writing just to check luck better try again and again finally one day you will come to know how much u wasted ur time and money 😛

    Reply
  220. Siva

    I think more than 5000 civil students got above 90 😁 So how many marks we have to get now ? To be in final list not 1:2 list any idea 💡

    Reply
  221. Shanoor

    AEE HALLTICKET DOWNLOADED ONLY ONE TIME…. Once you lost 2nd time not downloaded

    Reply
  222. Raja

    this is India.. India is only for girls and the people belongs to backwards castes.bloody politicians and i am ashamed of being an Indian.

    Reply
  223. Tritva

    Ya no sectional cutoff….gk paper was tough…paper 2nd was hard and paper 3rd was moderate…..

    Reply
  224. Ramu

    Zone 2 Bc non creamy expecting Gk 65 – 70 paper 2 80+to 90 paper 3 60 to 65

    Reply
  225. Vinay

    Hi guys. ..any guess what will the expected cutoff for mechanical in zone3 for unreserved category?

    Reply
  226. sandeep

    I think general studies paper was a bit tough,and am expecting around 60 to 70 marks…
    In technical 110 to 130 in each paper..I want to know is there sectional cutoff..
    am from zone 3,mechanical..

    Reply
  227. Rajput

    am non local..expecting around 100 in paper 1.paper 2 120 paper 3 130.
    anyone please suggest me the expected cutoff.
    do we have sectional cutoff too??

    Reply
    1. Ravi

      Nice 👍 I’m expecting positive results. For me papers are 60 percent easy I don’t feel paper tough 😁

      Reply
  228. Priyanka

    hii friends can you tell me about reservation for non local students, and no of non local candidates for mains ??

    Reply
  229. Ramesh

    All u people r just wasting ur time by expressing ur unaccounted viwes… I hope the main result was final selection… So, it depends on the vacancy… The personal who are qualifying are silent… U people are wasting by estimating ur useless thoughts….. So, I request u all don’t post silly nd useless comments…..

    Reply
    1. Priyanka

      means all seats are for local students?
      but in notification they have mentioned 60:40 ratio im not getting that

      Reply
  230. Ravi

    OC 40 percent marks in paper means in each paper 40 percent is cut off. This is the rule following by Appsc from many years so paper 1 59 marks and rest 2 papers 120 120 there is no use. First you have to qualify in all papers

    Reply
    1. Kranthi

      No sectional people don’t worry….300 par…there is a chances…or 280 above.. Since paper 2 problems are more many faced difficulties….please everyone don’t write their own predictions there are people who are waiting for jobs desperately they will be discouraged…hope for positive…Ravi , sir aim sorry if I had hurt you..please wait till apps ce Itself clarify…they will notify each and every process…everyone be patient..

      Reply
      1. Ravi

        Ok no problem bro I know about that that’s why I’m telling. My cousin is also Aee he got job in 2012.

        Reply
        1. Ravi

          My Uncle is Executive Engineer he told me about sectional cutoff in 2011 many people don’t qualify in all papers. Ranking of Employees in this Appsc JE AE AEE DE EE SE CE

          Reply
          1. manoj

            ante neeku manchi recommendations ra bhai….eh zone needhi ravi….

          2. Ravi

            Its depends on talent how you perform in exam. If you really good thinking student you will get job easy. Their is no place for any thing against law

          3. Ravi

            Uncle son completed civil engineer in 2010 due to competition he didn’t select till now. this time he didn’t apply for Appsc so recommendation will not work in getting jobs

  231. purna

    @priyanka non local 40%. not 15%. for executive posts there is 60:40. and non executive posts 85:15. ok all the best. u r from which branch and which state?

    Reply
  232. purna

    And here non local means not only candidates belongs to other states but also candidates belongs to other zones. ie if I am from zone2 means I’m non local to remaining all other zones of ap.

    Reply
    1. Kranthi

      yes…ur non local to zone-4.3 and 1…you are correct….i think they will consider nonlocal based on zone then only other state….so less chances for other state people…..Other state people dont get discouraged..as it is the same case for our state people in your state public service examinations…

      Reply
    1. Ravi

      There are many talent people in Andhra. By seeing prelims results I understood one thing this time getting job is so difficult. Every one gave there best I am one among them. Every one who wrote well will think like this time we will get. But final what happens we don’t know but just hope for the best if we got job our hard work gave us success.

      Reply
  233. suri

    When will b key released & overall there are nearly 10 mistakes i think …!;

    Reply
  234. Priyanka Dinkar

    Ok after result picture will get more clear I asked them they told all result will be on merit only. But I forget to ask @ ratio selection after mains…

    Reply
    1. Manoj

      Whom did u ask..is there sectional cutoff as Ravi claiming above….please confirm that also madam…

      Reply
  235. Ravi

    If there are many mistakes in key those who scored more marks will get advantage. They will calculate like this for example: if there are 10 mistakes in paper they will calculate for 140 marks and if you got 92/140 =65.71percent and they will calculate again for 150 marks like this 98.57/150 = 65.71 percent. So he got additional 6.57 marks.

    Reply
  236. Ravi

    Out of 10 mistakes he got 6.57marks. Mistakes are calculated according to your score more you score more marks u will get. In prelims they calculate like this

    Reply
  237. purna

    @sailu only 34224 candidates were wrote AEE mains exam. and in that around 6000 female members wrote that exam I think.

    Reply
  238. Bhaskar

    Hello can any one know how many were mechanical from out of 37401

    Reply
  239. Kajal

    Hi guys.. I am from delhi. I scored 106 in Screening test and can get approx 300 marks in mains. Is there any chance of selection.

    Reply
  240. Kajal

    Hi guys…
    I am from Delhi. I have scored 106 in Screening test and I can get approx 300 in mains. Is there any chance of my selection.
    And anyone is having any idea of expected cutoff for non local.

    Reply
    1. Sailu

      @ krishna in prelims they shortlisted in 1:50 ratio civil have more posts than mechanical. May be around 7000 look at notification

      Reply
  241. Siva

    Cut off depends upon reservation. First qualifying in every paper is important. Sc ST 220 to 240 + Bc non creamy 230 to250+ OC

    Reply
  242. Siva

    If there is no cutoff for every paper there is no use for conducting GK in this exam

    Reply
    1. ram

      who said no cut off it is there if u reach 40% in 1st paper then only u qualify to 2nd paper

      Reply
  243. abhishek

    Hey iam getting approximately 270 marks ,OC, Zone-3.
    please share your expected marks.

    Reply
  244. guru kiran

    i am getting nearly 235 marks zone2 non cramy bc is any chance

    Reply
  245. Rajasekhar

    Hiii i got 310-3015 mechanical zone1 obc is any chance for me

    Reply
  246. ram

    hey all of u really great frnds. with out our OMR sheets all of u able to know marks ha ha

    Reply
  247. purna

    There are some mistakes in mechanical key. for example in mechanical paper, they have given answer 4 for question no 129. that answer is wrong. same question was given in AEE screenings also. and answer is normal time of working. like that some mistakes r there.

    Reply
  248. VENKAT

    I GOT 300-310 IN BETWEEN EXACTLY FROM ZONE-4 MECHANICAL BC-B WHAT WAS MY CHANCES OF GETTING JOB

    Reply
  249. venkat

    i got 300-310 in mains from mechanical bc-b zone-4 what was my chances for getting job

    Reply
  250. Kranthi.

    Overall score cutoff only.just now clarified from APPSC…People don’t worry about paper cutoff ….Vijay deverapalli you are always right man.

    Reply
  251. VENKATESH

    how to remember the answers for problems, everybody is solving ?

    Reply
    1. venkat

      hey i am getting 300-310 bc-b mechanical zone-4 what was chances?

      Reply
  252. Chetan

    I am getting approximately 350-360.Is there any chance for selection in mains.

    Reply
  253. VENKATESH

    @Chetan, 80% aggregate means no problem at all. Your berth confirmed.

    Reply
  254. ramya

    Any girls from mech who got 230 above zone4…..i got 230-240 any chances for me…nd how to know approximate marks to get a job for girls…..

    Reply
  255. Sailu

    Hello I got just 160 reached minimum cutoff bc-A non creamy local zone-2 female is any chance for job

    Reply
          1. Gangadhar

            me too civil eng.

            but I m expecting more No of mech applicants would be there..

          1. Sailu

            @gangadhar civil applicants in mains around 27, 000. i am from krishna zone-2. Which branch u r

  256. purna

    @kranthi, enni marks vastai anukuntunnav. and is there any option to raise objections to key?

    Reply
  257. Gangadhar

    friends,
    any idea about the result will be declared with merit list ?

    Reply
  258. Raju

    I got
    95-gen
    115-me&civ
    116-mech
    Zone -3
    SC category..
    Any chances?

    Reply
  259. SRAVANA KUMAR NANDELA

    Raju ru really got 95 marks in GS and 115 marks in SM & FM.

    Reply
  260. ramya

    Frnds Pls send me a link for appsc ae examination syllabus branch mechanical….at website also i could not find it clearly

    Reply
  261. K V J Bhargav

    i got 285 marks from zone-3 mechanical and BC-A. Is there any chance

    Reply
  262. Raju

    Yes….paper is not that much of tough…we can score 100marks in gs..and 120marks in Fm&hm@sravana Kumar

    Reply
  263. honey

    bloody how did u remember what u hav opted?? everyone commenting bull shit.

    Reply
    1. Gangadhar

      whoever remembers can analyse his/her score.. and who don’t remember for them “picture abhi baaki hai “

      Reply
    1. Siva Karthik

      yes bro all those are fake dont worry.in prelims only 2 people from zone 3 mechanical got above 108 marks now with a difficult paper they are posting 300+marks bull shit

      Reply
    2. Siva Karthik

      dont worry bro all those are fake marks in aee prelims from mech only 2 people got above 108 now everyone is posting 300+they are playing with us

      Reply
  264. sai

    guys only two people from mech in zone 3 in aee prelims got above 108 marks.but now with such a difficult paper everyone is getting above 300 easily.how is that possible.did some miracle happened to u.plzz dont post fake comments.u can check in prelims mark list all series of 6012 6022 6032 6042 ……6132 6142 belongs to mech and 6011 6021 6031 6041….. 6141 are civil ie 1 series is for civil and 2 series is for mech u can check if u want.so guys who are faking ur marks plzz dont post anything there are many people who have hopes on this exam..

    Reply
  265. sai

    guys only 2 people from zone 3 mechanical got above 108 marks in aee prelims in such an easy paper.now everyone is posting above 300 sry min 300 did some miracle happened to u guys plzz dont post fake marks for u it may be for joke but many have hopes on this exam

    Reply
      1. Saleem

        Min 40% for Oc
        35% for bc
        30% for Sc and st
        If anybody didn’t cross this score in general studies,the remaining papers will not be evaluated,so simply they are out off Compitation

        Reply
  266. HEMANTH KAMAL

    Hello Mr. Srinivas Garu, Slow Sand filters are designed for 30 years, not for 10 years. You please cross check. They are designed for two times the avg daily demand.

    Reply
  267. HEMANTH KAMAL

    And Rapid Sand filters are designed for 15 years, there no question of 10 years in any design. Cross check clearly.

    Reply
      1. Sailu

        @sri Me also same zone-2 civil got 160 minimum qualifying mark thatswhy asking

        Reply
  268. SRAVANA KUMAR NANDELA

    any one plz conform we had drag forces chapter in our FM syllabus.(i.e in 2nd paper)

    Reply
      1. anonymous

        as per notice means 35% right it means 156 marks were enough to get aee post 0r 40% means 160 not more than this marks cutoff sure every one who got these 40% are going to be selected how??

        Reply
        1. Gangadhar

          in Notice it is clearly mentioned that merely qualifying in the computerised test does not mean that the person will get the job. Allocation will be as per final merit list considering all the community criteria.

          Reply
        1. sailu

          how u seen ur result niku anni gurtu unnaya inka key correcto kado telidu

          Reply
    1. Gangadhar

      don’t worry , chances are there for both of you..
      wait for the final result.

      Reply
  269. purna

    @anonymous wait for final results. there is only 1 oc female post in zone 2 for mechanical. And don’t worry.

    Reply